This is for "1 PAIR OF LED ULTRA BRIGHT WHITE LIGHTS". We use these lights as reverse lights, backup lights, rock lights or any other place that space is limited. These are ultra bright! This is a simply (+) (-) installation. Simply drill a 7/16" hole and poke the threaded portion through and tighten up the nut. That's it! Get creative with these little guys because they are AWESOME!

After installing LED lights into a Jeep JK (Along with many other vehicles) you will notice that your turn signal and the dash indicator lights blink much faster than normal. This is due to the incredibly low load that the LED Lamps draw. The computer assumes that you have a burnt out light and warns you through the increased blinker speed. The fix for this issue is rather easy. You simply install a load resistor inline. One wire gets spliced into the lead for the turn signal and the other wire gets spliced into the ground. Thats all she takes!

Any Questions can be directed to [email protected]

This is the Pandemic 2007-18 Jeep Wrangler JK Taillight Conversion Plug-n-Play Adapter Harness. This unit was designed out of necessity back in 2013 after the original light kit was released. Customers had a difficult time completing their own wiring and needed a much simpler solution. When converting from the OEM JK taillights to an industry standard 4" Round "STOP TURN TAIL" light this harness will allow you to plug directly into your factory Jeep harness and then into the "stop-turn-tail" light of your choice. There are also 2 bare leads that include a green power lead and a white ground wire that is to be used for a REVERSE light. These are bare wires due to the fact that the reverse lights vary and we have many customers that use different lights than what are supplied in the full Pandemic Taillight conversion kit.

Pandemic's universal flush mount taillights are a MUST if you plan on doing any tight trail riding.  As these replace the stock incandescent taillights, and making your vehicle that much more capable of taking on the trails, without damage and in STYLE!  Let's face it, you break it, then REPLACE it with something BETTER that can handle your type of adventure.  Better yet, stay out of trouble as these are DOT approved.  Go from trail to street with no worries.

PANDEMIC Has finally developed a solution to get rid of the bulky OEM tail lights that come on all Jeep Wrangler JK's. The goal is not only about changing to a rugged new appearance but giving you a light that won't get ripped off while you are out playing on the trail! Our new LED Tail Light Conversion KIT allows you to remove your OEM tail light assemblies , cut the OEM mounts off, drill 6 holes & bolt on the new adapter plates with stainless steel button head hardware. All this is accomplished for a fraction of the cost of other full systems that are currently on the market.

PANDEMIC has finally developed a solution to get rid of the bulky OEM tail lights that come on all Jeep Wrangler JK's. The goal is not only about changing to a rugged new appearance but giving you a light that won't get ripped off while you are out playing on the trail!

PANDEMIC has finally developed a solution to get rid of the bulky OEM tail lights that come on all Jeep Wrangler JK's. The goal is not only about changing to a rugged new appearance but giving you a light that won't get ripped off while you are out playing on the trail!